Introdução

Use this guide to remove the battery cover and battery from the Game Boy.

Peças

Não são necessárias peças.

Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad. Once the screw has been loosened, lift the cover off the back of the device. Once the screw has been loosened, lift the cover off the back of the device.
  • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

  • Once the screw has been loosened, lift the cover off the back of the device.

Adicionar comentário

MANTA DRIVER KIT
112 bit driver kit $59.99
MANTA DRIVER KIT
112 bit driver kit $59.99
Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector. Gently grab the wires. Gently grab the wires.
  • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

  • Gently grab the wires.

I heard of someone doing this and the connecter got stuck in the plug. Is there any other way to do it?

Lucas Hoekstra (Lucas9810) - Responder

Carefully pull the wires until the connector comes out of the device. Be careful! Don't pull too hard, or you may rip the wires out from the connector.
  • Carefully pull the wires until the connector comes out of the device.

  • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

  • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas concluíram este guia.

Jack

Member since: 21-01-2010

243 reputação

9 Guides authored

Equipe

Cal Poly, Team 8-46, Regan Winter 2010 Membro de Cal Poly, Team 8-46, Regan Winter 2010

CPSU-REGAN-W10S8G46

5 Membros

15 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 29

Últimos 30 dias: 103

Todo: 10,503