Introdução

Accessing the RAM in this computer is straightforward and requires minimal disassembly.

Peças

Não são necessárias peças.

Locate the two clips on the bottom of the computer that support the battery.
  • Locate the two clips on the bottom of the computer that support the battery.

Adicionar comentário

Using your fingers,  push the clips inward and then upward.
  • Using your fingers, push the clips inward and then upward.

  • Lift the battery out of the computer.

Adicionar comentário

  • Locate the RAM cover.

Adicionar comentário

  • Remove the screw labeled “3.”

  • The screw is not shown in the picture.

Adicionar comentário

  • Remove the RAM cover by lifting it with your finger.

Adicionar comentário

  • Remove the RAM module by pushing the securing clips outward.

  • The RAM module will then slightly pop out.

  • When you are installing a new RAM module, carefully insert it into the socket and push downwards.

Adicionar comentário

  • Carefully pull the RAM module from the computer.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Neil Daniels

Member since: 17-01-2011

1.276 reputação

11 Guides authored

Equipe

Cal Poly, Team 5-18, Amido Winter 2011 Membro de Cal Poly, Team 5-18, Amido Winter 2011

CPSU-AMIDO-W11S5G18

3 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Todo: 2,755