Introdução

This guide is for the Euhomy IM-06D icemaker. This guides purpose is to replace the digital display. This part controls the lights and controls of the icemaker on the top of the cover. Some symptoms of this would be the lights for the buttons not turning on or them no longer working. Please make sure to unplug the device before starting all guides.

O que você precisa

Passo 1 Lid

Euhomy IM-06D Digital Display Replacment, Lid: passo 1, imagem 1 %32

Euhomy IM-06D Digital Display Replacment, Lid: passo 1, imagem 2 %32

Euhomy IM-06D Digital Display Replacment, Lid: passo 1, imagem 3 %32

Open the lid.
Remove the two 5 mm Phillips screws that secure the lid.
Gently lift the lid off, with care not to damage or strain the attached cable.

Editar

Passo 2

Use a jimmy to pop off the white cover on the back of the lid.

Editar

Passo 3

Euhomy IM-06D Digital Display Replacment: passo 3, imagem 3 %32

Remove the two 5 mm Phillips screws that secure the display PCB.
Remove the lid.

Editar

Passo 4 Digital Display Replacment

Euhomy IM-06D Digital Display Replacment, Digital Display Replacment: passo 4, imagem 1 %32

Euhomy IM-06D Digital Display Replacment, Digital Display Replacment: passo 4, imagem 2 %32

Disconnect the display connector.

Editar

Conclusão

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.