O que você precisa
-
-
-
The ethernet diagnostics port is located behind the drivers side instrument panel cover.
-
The plastic panel is secured by 3 metal flex trim clips. Using an appropriate pry tool pry backwards at the points indicated
Pergunte ao FixBot
-
-
-
-
After opening the side panel, hold onto the cover until you disconnect the key fob antenna connector. Failure to do so could cause excessive strain on the wiring
-
Reach into the opening to feel for the diagnostic cable, if you have never had the car serivced it may be tucked down into the recess
-
There should only be one cable with a circular white connector
-
-
-
Connect the FakraHSD to Ethernet cable until you hear a click.
-
To disconnect press down on the small finger and gently pull the connectors apart.
-
-
To reassemble your device, follow these instructions in reverse order.
