Introdução

Follow these steps to replace a faulty or broken tuner at the head of the Epiphone ES-335 PRO electric guitar. This component of the guitar can also be changed to upgrade the design of the guitar to your liking.

Peças

Não são necessárias peças.

Using the tuner, loosen the string by turning the tuner. Continue to loosen the string until it is easily unwrapped and pulled out of the tuner.
  • Using the tuner, loosen the string by turning the tuner.

  • Continue to loosen the string until it is easily unwrapped and pulled out of the tuner.

Adicionar comentário

On the bridge of the guitar, push the string through the back until the other end is visible. Then grasp and pull the string all the way out.
  • On the bridge of the guitar, push the string through the back until the other end is visible. Then grasp and pull the string all the way out.

Adicionar comentário

Using a phillips head #2 screwdriver, unscrew the two 1.0 mm length screws on the sides of the tuner.
  • Using a phillips head #2 screwdriver, unscrew the two 1.0 mm length screws on the sides of the tuner.

  • Be sure to keep track of the screws if you are using them for the new tuner, unless the new tuner has screws of its own.

Adicionar comentário

The tuner should come right out of the back of the head of the guitar.
  • The tuner should come right out of the back of the head of the guitar.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 9

Todo: 52