Introdução
The cyclone is a method of separating particles from the air within the vacuum. If something goes wrong with the cyclone it could cause issues with suction or even prevent the vacuum from working at all.
O que você precisa
-
-
-
Locate the dust bin's red release lever on the side of the device.
-
-
-
-
Push the red lever, pull the back up and away from the dust bin to separate them.
-
-
-
-
Use a T8-Torque screwdriver to remove the 18mm screw from the back of the Cyclone.
-
-
-
Remove the bottom of the cyclone screen by twisting it to the left and pulling down.
-
-
-
Locate and take out the six 26mm screws with a T-8 Torque screwdriver.
-
Once you have removed the screws you can remove the rest of the Cyclone.
-
-
Pergunte ao FixBot
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
USF Tampa, Team S10-G1, Thompson Fall 2017 Membro de USF Tampa, Team S10-G1, Thompson Fall 2017
USFT-THOMPSON-F17S10G1
4 Membros
Autoria de 16 guias
1Comentário do guia
I can’t remove the cyclone screen. Any tricks to removing?
