Conserte seus objetos Comunidade Loja
Participe da comunidade de reparos - Criar conta

Drill Master Heat Gun Fan Replacement

Introdução

The internal fan keeps your machine from overheating. A faulty fan can also cause smoking. To remedy these problems, use this guide to replace your fan.

O que você precisa

  1. Drill Master Heat Gun Fan Replacement, Fan: passo 1, imagem 1 %32

    • Be sure the heat gun is unplugged before starting this process.

    • Remove the seven 14mm screws from the side of the drill using the PH#0 screwdriver.

    • You will need a screwdriver extension.

    Editar

  2. Drill Master Heat Gun Fan Replacement: passo 2, imagem 1 %32

    • Remove the 8mm screw from underside of barrel using the PH#0 screwdriver.

    • Don't try to open the casing just yet.

    Editar

  3. Drill Master Heat Gun Fan Replacement: passo 3, imagem 1 %32 Drill Master Heat Gun Fan Replacement: passo 3, imagem 2 %32 Drill Master Heat Gun Fan Replacement: passo 3, imagem 3 %32

    • Remove the barrel casing on either end by twisting and pulling each side off.

    Editar

  5. Drill Master Heat Gun Fan Replacement: passo 4, imagem 1 %32

    • Remove the top casing to reveal inside of drill. You might have to tug a little harder for this one.

    Editar

  6. Drill Master Heat Gun Fan Replacement: passo 5, imagem 1 %32

    • Remove the metal casing and fan cover from the fan unit.

    Editar

  7. Drill Master Heat Gun Fan Replacement: passo 6, imagem 1 %32

    • Bend the metal prongs backward that connect the fan motor to the plastic cap.

    • Bending the brackets too far back can cause the brackets to break.

    Editar

  8. Drill Master Heat Gun Fan Replacement: passo 7, imagem 1 %32

    • Remove the plastic cap from the motor,

    • This will allow you to work only with the motor and fan.

    Editar

  9. Drill Master Heat Gun Fan Replacement: passo 8, imagem 1 %32

    • Remove the fan by pulling it from the motor rod and replace.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 3

Últimos 7 dias: 13

Últimos 30 dias: 68

Ao todo: 3,668