Ir para o conteúdo principal

Disassembling Optoma HD20 Cover

O que você precisa

  1. Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: passo 1, imagem 1 %32 Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: passo 1, imagem 2 %32
    • Twist the focal cap clockwise until it is fully extended.

    • Remove the focal cap by pulling it straight out.

  2. Disassembling Optoma HD20 Cover: passo 2, imagem 1 %32
    • Use a Phillips #1 screwdriver to remove the three 7.5mm screws on the bottom of the device.

  3. Disassembling Optoma HD20 Cover: passo 3, imagem 1 %32
    • Use a plastic opening tool to gently pry the top cover off of the device.

    • It is easier to pry off the cover from the back side just above the HDMI ports.

  4. Disassembling Optoma HD20 Cover: passo 4, imagem 1 %32
    • When removing the cover, be cautious of the ribbon connecting the top buttons to the main circuit board. The ribbon must be disconnected before proceeding.

    • Remove the ribbon by disconnecting it from the main circuit board.

    • Lift up the clip holding it down and pull the ribbon out.

Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas executaram este guia.

Trever

Membro desde: 01/22/15

1.264 Reputação

Autoria de 6 guias

Equipe

Cal Poly, Team 21-23, Maness Winter 2015 Membro de Cal Poly, Team 21-23, Maness Winter 2015

CPSU-MANESS-W15S21G23

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 16

Duração total: 3,026