Introdução

Use this guide to remove the back panel to access the components inside.

Peças

Não são necessárias peças.

The battery is located on the bottom of the camera.
  • The battery is located on the bottom of the camera.

  • Remove the battery by placing your thumb on the buttom flap and sliding the release button away from the side the lens is on. (The screwdriver is simply used as a reference point, no screws need to be removed)

  • Charge the battery for 60-90 minutes if your battery is dead.

  • When installing a charged battery, align the battery appropriately, with the positive signs and negative signs lining up.

Adicionar comentário

Unscrew the 3mm long cover screws at the corners of the camera using a #00 Philips Screwdriver.
  • Unscrew the 3mm long cover screws at the corners of the camera using a #00 Philips Screwdriver.

  • Unscrew the 2mm long screws securing the sides of the camera which holds the back panel. Use the same screwdriver.

Adicionar comentário

  • Be careful when removing the back cover, you will need to detach the connecting ribbons

  • Detach the ribbons using your thumb, sliding them out of their slots.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Bobby Hodges

Member since: 18-04-2010

49 reputação

6 Guides authored

Equipe

Cal Poly, Team 33-71, Johann Spring 2010 Membro de Cal Poly, Team 33-71, Johann Spring 2010

CPSU-JOHANN-S10S33G71

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Todo: 4,001