Introdução

We will now disassemble the guts of the phone, including the SIM card reader, vibrating unit, power toggle button, audio speaker, power assembly/microphone, and the battery connector.

Peças

Não são necessárias peças.

Hold the phone and push the white button with your thumb. While pressing the button, slide the back plate up (towards the top of the phone) and off the phone. While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.
  • Hold the phone and push the white button with your thumb.

  • While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.

Adicionar comentário

Locate grey buttons beneath battery (shown). Spread buttons simultaneously away from each other and the battery will pop out.
  • Locate grey buttons beneath battery (shown).

  • Spread buttons simultaneously away from each other and the battery will pop out.

  • Remove battery from phone.

Adicionar comentário

Where shown, spread the front faceplate and push forward. Flip over the device, and pry the faceplate away.
  • Where shown, spread the front faceplate and push forward.

  • Flip over the device, and pry the faceplate away.

Adicionar comentário

Remove six T6 screws. Remove six T6 screws.
  • Remove six T6 screws.

Adicionar comentário

Insert spudger between screen assembly and phone body. Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.
  • Insert spudger between screen assembly and phone body.

  • Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.

Adicionar comentário

Remove logic board as shown. Remove logic board as shown.
  • Remove logic board as shown.

Adicionar comentário

Use the following legend to locate each component:
    • Use the following legend to locate each component:

      • Microphone/power assembly.

      • Vibrating unit.

      • SIM card reader.

      • Audio speaker.

      • Power toggle button.

      • Battery connector.

Adicionar comentário

Insert spudger between power assembly/micro-phone and phone body. Pry as shown and remove the power assembly/microphone.
  • Insert spudger between power assembly/micro-phone and phone body.

  • Pry as shown and remove the power assembly/microphone.

Adicionar comentário

Once located, the following components are easily removed by pulling them out with your hand.
  • Once located, the following components are easily removed by pulling them out with your hand.

    • Microphone/power assembly.

    • Vibrating unit.

    • SIM card reader.

    • Audio speaker.

    • Power toggle button.

    • Battery connector.

Adicionar comentário

Audio speaker. Audio speaker.
  • Audio speaker.

Adicionar comentário

SIM card reader. SIM card reader.
  • SIM card reader.

Adicionar comentário

Vibrating unit. Vibrating unit.
  • Vibrating unit.

Adicionar comentário

Power toggle button. Power toggle button.
  • Power toggle button.

Adicionar comentário

Battery connector. Battery connector.
  • Battery connector.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Nico Lee

Member since: 19-04-2010

54 reputação

11 Guides authored

Equipe

Cal Poly, Team 30-41, Garner Spring 2010 Membro de Cal Poly, Team 30-41, Garner Spring 2010

CPSU-GARNER-S10S30G41

4 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 2,737