Peças

Não são necessárias peças.

Turn off the camera.
  • Turn off the camera.

    • Locate the power switch on the front of the camera below the camera lens.

    • Slide the switch to the off position.

Adicionar comentário

Locate the 3 screws that hold the back cover to the camera. One screw is located on the film opener side of the camera.
  • Locate the 3 screws that hold the back cover to the camera.

    • One screw is located on the film opener side of the camera.

    • The other screws are located on the opposite side of the camera.

Adicionar comentário

Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover. Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover. Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover.
  • Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover.

Adicionar comentário

Open the film door to remove the back cover. Slide the film door lever to the left until the film door opens.
  • Open the film door to remove the back cover.

    • Slide the film door lever to the left until the film door opens.

Adicionar comentário

Use a plastic opening tool to pry the case open until a small gap is present. Repeat this process at the top and bottom of the film door to loosen it.
  • Use a plastic opening tool to pry the case open until a small gap is present.

    • Repeat this process at the top and bottom of the film door to loosen it.

Adicionar comentário

Guia de Presente para o Dia dos Pais
Vamos honrar mais do que nossos pais. Vamos celebrar todos os mentores que nos ensinaram a consertar.
Guia de Presente para o Dia dos Pais
Vamos honrar aqueles que nos ensinaram a consertar.
Grab the top and bottom of the case firmly as shown. Gently remove the back of the camera case with a slight twisting motion. Gently remove the back of the camera case with a slight twisting motion.
  • Grab the top and bottom of the case firmly as shown.

    • Gently remove the back of the camera case with a slight twisting motion.

Adicionar comentário

Locate the 3 screws on the camera that hold the front cover of the camera to the camera body. The first 2 are located on the bottom of the camera.
  • Locate the 3 screws on the camera that hold the front cover of the camera to the camera body.

    • The first 2 are located on the bottom of the camera.

    • The last screw is located behind the flash module.

      • Turn the camera on, and raise the flash module to locate the flash module screw.

Adicionar comentário

Remove the 2 screws at the base of the camera housing. Use the Phillips #00 Precision Screwdriver and remove the screws.
  • Remove the 2 screws at the base of the camera housing.

    • Use the Phillips #00 Precision Screwdriver and remove the screws.

    • Repeat this process for the screw behind the flash module.

Adicionar comentário

Remove the screw located under the flash module using the Phillips #00 Precision Screwdriver. Remove the screw located under the flash module using the Phillips #00 Precision Screwdriver.
  • Remove the screw located under the flash module using the Phillips #00 Precision Screwdriver.

Adicionar comentário

Remove the flash cover. Remove the flash module by twisting it up and outward of the camera housing.
  • Remove the flash cover.

    • Remove the flash module by twisting it up and outward of the camera housing.

    • The cover can now be be removed.

Adicionar comentário

Remove the film door lever. Remove the screw holding the film lever in place by using a Phillips #00 Precision Screwdriver.
  • Remove the film door lever.

    • Remove the screw holding the film lever in place by using a Phillips #00 Precision Screwdriver.

    • Using a plastic opening tool, gently pry the switch upwards to remove it.

Adicionar comentário

Open the battery door by pushing the lever towards the arrow indicated.
  • Open the battery door by pushing the lever towards the arrow indicated.

Adicionar comentário

Remove the front cover. Insert your thumb in the film hole and gently pry the bottom loose. Once the front is loose, gently pull it out.
  • Remove the front cover.

    • Insert your thumb in the film hole and gently pry the bottom loose.

    • Once the front is loose, gently pull it out.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

David Cottrell

Member since: 04-10-2011

58 reputação

5 Guides authored

Equipe

UW Stout, Team 1-2, Zhou Fall 2011 Membro de UW Stout, Team 1-2, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G2

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 512