Introdução

This guide will show you how to open the outer shell of your Flip Video.

Peças

Não são necessárias peças.

Turn off the device and take the batteries out.
  • Turn off the device and take the batteries out.

  • Remove metal sticker under the LCD screen with a spudger.

    • This may require a large force to pry off the glued sticker.

Adicionar comentário

Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.
  • Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.

Adicionar comentário

  • Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.

Adicionar comentário

  • Open battery door. This can be done by gently depressing and sliding the battery down downward.

Adicionar comentário

  • Use the spudger to separate outer shells.

    • The spudger must be inserted between the shell halves to pry the edges apart.

    • Slowly work around the outside to separate the halves.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Elizabeth

Member since: 15-04-2010

100 reputação

6 Guides authored

Equipe

Cal Poly, Team 26-21, Regan Spring 2010 Membro de Cal Poly, Team 26-21, Regan Spring 2010

CPSU-REGAN-S10S26G21

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 1,774