Introdução
If your Dirt Devil Gator (Model Number: BD10100) isn’t creating suction, picking up debris, or functioning properly, you may need to replace the filter. Follow this guide to clean/replace the filter on your device.
However before using this guide, you may not need to fully replace the filter, just clean it. A clogged air filter is a simple problem with a quick fix to get you started vacuuming again quickly!
The filter on the Dirt Devil Gator helps collect dirt and debris from the ground into your vacuum. A clogged filter will not pick up dirt or hold on to already picked up debris. If the filter is destroyed, it will need a replacement.
Before beginning, make sure to power off your device completely and disconnect from any external power source.
-
-
To get to the filter, press the button on the top of the vacuum to split your device in two.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
2 outras pessoas executaram este guia.
Equipe
Embry-Riddle Aeronautical University, Team S5-G4, Watkins Spring 2020 Membro de Embry-Riddle Aeronautical University, Team S5-G4, Watkins Spring 2020
ERAU-WATKINS-S20S5G4
Membros da 4
Autoria de 5 guias
