Peças

Não são necessárias peças.

  1. Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2). Pry the edges of the base cover and lift it to remove it from the computer.
    • Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).

      • Pry the edges of the base cover and lift it to remove it from the computer.

      • NOTE: Use a Torx #5 screwdriver for the base screws and a Philips screwdriver for the two M2x8 screws inside the badge flap.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. Disconnect the battery cable from the system board [1].
    • Disconnect the battery cable from the system board [1].

    • Remove the seven M2x4 screws that secure the battery to the computer [2].

    • Lift the battery off the computer [3].

    • Do not apply pressure to the surface of the battery

    • Do not bend

    • Do not use tools of any kind to pry on or against the battery

    • If a battery cannot be removed within the constraints above, please contact Dell technical support

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Johnathan Hammond

Member since: 28-02-2018

35.962 reputação

408 Guides authored

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

15 Membros

925 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 35

Últimos 30 dias: 141

Todo: 913