Introdução

Remove and Replace the Hard Drive

Ferramentas

Não são necessárias ferramentas.

Peças

Não são necessárias peças.

Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
  • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Adicionar comentário

Lay the computer on its side; you will see a blue knob.
  • Lay the computer on its side; you will see a blue knob.

  • Turn this knob 90 deg clockwise.

Adicionar comentário

  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

Adicionar comentário

  • Unplug the blue cable that connects the hard drive to the motherboard.

Adicionar comentário

  • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

Adicionar comentário

  • Squeeze the release tabs on either side of the hard drive.

Adicionar comentário

  • Slide the Hard Drive out while squeezing the tabs.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas concluíram este guia.

Wyatt

Member since: 06-10-2010

742 reputação

6 Guides authored

Equipe

Cal Poly, Team 22-4, Maness Fall 2010 Membro de Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membros

13 Guides authored

Thanks for great tutorial.

Politers - Responder

Yeah great tutorial!

Rebinas - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Todo: 5,385