Introdução

This guide requires a Phillips #00 screwdriver

Peças

Não são necessárias peças.

Unplug the laptop from the power adapter and turn the power off.
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

Adicionar comentário

Slide the battery-lock tab and hold.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

Adicionar comentário

  • Turn the laptop around.

Adicionar comentário

  • Use your fingers to gently pull up on the hinge covers. They will release with an audible snap.

  • Fold the screen back to 180 degrees.

  • Using your index fingers, pull up the hinge cover.

Adicionar comentário

  • After the hinges pop, pull the hinge cover gently.

  • Pull the clear tab on the right side of the laptop up. This tab will disconnect the hinge cover from the laptop.

Adicionar comentário

  • Remove the two 3mm screws on the top of the keyboard (nearest to the screen)

Adicionar comentário

  • Tilt the keyboard away from the screen.

  • Pull up on the white tab underneath the keyboard to release the keyboard.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ana

Member since: 11-01-2011

111 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 13-2, Forte Winter 2011 Membro de Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 8

Todo: 3,636