Introdução
Does the LED light cover have a crack on the outer cap? Is it yellowed or discolored? This guide will show you the way to replace the LED light cover for your Wi-Fi Baby Camera.
O que você precisa
-
-
-
Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.
Pergunte ao FixBot
-
-
-
Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.
-
-
-
-
-
Remove one Phillips #2 screw from each side of the camera lens.
-
-
-
Ferramenta utilizada neste passo:Tweezers$4.99
-
Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.
-
-
-
Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.
-
-
-
-
-
Grab the white cylinder with your thumb and index finger.
-
-
-
Gently lift the cylinder up from its placement in your Wi-Fi Baby Camera.
-
-
To reassemble your device, follow these instructions in reverse order.
Equipe
USF Tampa, Team S1-G5, Leahy Fall 2018 Membro de USF Tampa, Team S1-G5, Leahy Fall 2018
USFT-LEAHY-F18S1G5
4 Membros
Autoria de 4 guias
