Introdução

If your Cosori Pro II shell is cracked or broken and you want to replace it with a new shell, If so here is a guide to take apart your Cosori Pro II for easy shell replacement. For this guide, you will need a plastic opening tool and a Phillips #0 screwdriver head

O que você precisa

Passo 1 Shell

Cosori Pro II Shell Replacement, Shell: passo 1, imagem 1 %32

Flip the device upside down and remove all of the Phillips #1 screws.

Editar

Passo 2

Use an opening tool to push on the retaining hooks to disengage them while prying slightly.
Remove the panel.

Editar

Passo 3

Use a Phillips #1 screwdriver to remove all four screws.
Lift off the bracket.
When lifting this off be careful to not unplug the screen.

Editar

Passo 4

Use a Phillips #0 screwdriver to remove all the screws connecting to the shell.
Dissemble the shell going up to separate the basket holder.

Editar

Passo 5

Use a Phillips #0 screwdriver and the 150 mm Flex Extension to unscrew the bottom plastic connecting to the basket holder.
Be careful to not apply too much force to the metal as it can cause it to warp it, and so it is easy rescrew the plastic piece in place.

Editar