Conserte seus objetos Comunidade Loja

Computer King Muffin Kinder 7 Logic Board Replacement

Introdução

To complete this guide, you will need to disassemble your device and use a soldering iron to replace all the wires from the logic board.

Make sure to power off the device before you begin to take apart your device. Not doing so could potentially cause harm.

O que você precisa

  1. Computer King Muffin Kinder 7 Logic Board Replacement, Logic Board: passo 1, imagem 1 %32 Computer King Muffin Kinder 7 Logic Board Replacement, Logic Board: passo 1, imagem 2 %32

    • Use the plastic opening tool help push out the microSD card from the microSD slot.

    Editar

  2. Computer King Muffin Kinder 7 Logic Board Replacement: passo 2, imagem 1 %32

    • Use the plastic opening tool to unclip the plastic front from the plastic back. Use the MicroSD slot to initially start the unclipping.

    Editar

  3. Computer King Muffin Kinder 7 Logic Board Replacement: passo 3, imagem 1 %32 Computer King Muffin Kinder 7 Logic Board Replacement: passo 3, imagem 2 %32

    • Unscrew the nine 3.0 mm Phillips #00 screws.

    Editar

  5. Computer King Muffin Kinder 7 Logic Board Replacement: passo 4, imagem 1 %32

    • The battery is glued onto the black plastic. Use the plastic opening tool to pry the battery from the black plastic

    Editar

  6. Computer King Muffin Kinder 7 Logic Board Replacement: passo 5, imagem 1 %32 Computer King Muffin Kinder 7 Logic Board Replacement: passo 5, imagem 2 %32 Computer King Muffin Kinder 7 Logic Board Replacement: passo 5, imagem 3 %32

    • Unsolder the 11 red, back, and grey wires connected to the logic board.

    • Tips on how to solder can be found here.

    Editar

  7. Computer King Muffin Kinder 7 Logic Board Replacement: passo 6, imagem 1 %32 Computer King Muffin Kinder 7 Logic Board Replacement: passo 6, imagem 2 %32 Computer King Muffin Kinder 7 Logic Board Replacement: passo 6, imagem 3 %32

    • Use the flat end of the spudger to lift the black panels covering the three ribbon cables connected to the logic board.

    Editar

  8. Computer King Muffin Kinder 7 Logic Board Replacement: passo 7, imagem 1 %32

    • Pull the three ribbon cables out so that they are no longer connected to the logic board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 3 outros contribuidores

Katherine

Membro desde: 01/22/15

439 Reputação

Autoria de 3 guias

Emblemas: 11

+8 outros emblemas

Equipe

UWT Liner: Group 2 Membro de UWT Liner: Group 2

Community

Membros da 4

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 233