Introdução
The Video Interface Controller (VIC) is is the graphics chip for the C64.
O que você precisa
-
-
-
1. Remove three 6.75mm ph2 screw heads from the casing
Pergunte ao FixBot
-
-
-
2. Split the case of the C64 open by pulling up on the case towards you
-
-
-
-
-
-
1. Detach the multi-colored wire bundles that's connected to the motherboard
-
-
-
2. Without using any tools prop up the metal VIC plate with both hands to expose the VIC chip.
-
-
-
3. Use a Phillips screwdriver to pry up the VIC chip. Then, use your hands and with small pressure pull it away to remove it from the motherboard.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
2 outras pessoas executaram este guia.
Equipe
USF Tampa, Team 13-6, Staggers Fall 2014 Membro de USF Tampa, Team 13-6, Staggers Fall 2014
USFT-STAGGERS-F14S13G6
4 Membros
Autoria de 45 guias
1Comentário do guia
It's awesome to see that people care enough about these machines to make repair guides about them! Great job!
