Introdução

This guide shows how to remove the LCD screen from the camera. You may have to replace a broken or shattered screen.

Peças

Não são necessárias peças.

  1. Locate 12 screws. Four on the left, four on the right, and four on the bottom.
    • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

  2. Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
    • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

    • Separate the front case from the body of the camera.

    • Separate the back case from the body of the camera.

    • Remove the metal grating located to the right of the LCD screen by inserting the plastic opening tool under the grating and pulling up.

    • Before removing the side metal bracket, first remove the attached strap knob by twisting it off.

    • Then, remove the side metal bracket by inserting the plastic opening tool under the bracket and pulling up.

    • Using the plastic opening tool, pry up the LCD screen starting at one of the corners. Insert the tool under one of the corners and lift up.

    • Continue to lift the LCD screen all the way up.

    • Be careful not to rip any wires connecting the LCD screen to the top of the camera.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Laura

Member since: 19-04-2012

31 reputação

2 Guides authored

Equipe

Cal Poly, Team 9-45, Regan Spring 2012 Membro de Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 Membros

6 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 12

Todo: 1,110