Pular para o conteúdo principal

Introdução

This guide shows how to remove the back case of the camera to replace a damaged back case or access the inner parts of the camera.

Peças

Nenhum componente especificado.

  1. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom.
    • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

  2. Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
    • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

  3. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  4. Separate the front case from the body of the camera.
    • Separate the front case from the body of the camera.

  5. Separate the back case from the body of the camera.
    • Separate the back case from the body of the camera.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Laura

Membro desde: 19-04-2012

31 reputação

2 Guias de autoria

Equipe

Cal Poly, Team 9-45, Regan Spring 2012 Membro de Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 4

Todo: 429