Introdução

If your LCD is cracked or not turning on replace it with this guide.

  1. Using the plastic opening tool, pry off the top cover of the LCD assembly (within the red box in the first picture). Pry around the front and side edges for the easiest removal.
    • Using the plastic opening tool, pry off the top cover of the LCD assembly (within the red box in the first picture).

      • Pry around the front and side edges for the easiest removal.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.
    • After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.

  4. Completely remove the LCD by disconnecting the ribbon cable from the LCD with a gentle pull.
    • Completely remove the LCD by disconnecting the ribbon cable from the LCD with a gentle pull.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Steven MacLean

Member since: 14-01-2013

74 reputação

2 Guides authored

Equipe

Cal Poly, Team 19-41, Regan Winter 2013 Membro de Cal Poly, Team 19-41, Regan Winter 2013

CPSU-REGAN-W13S19G41

4 Membros

6 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Todo: 890