Introdução

Removing the grip is necessary to reach the battery door. This process is safe and easy.

Peças

Não são necessárias peças.

Remove the two 4.8 mm black screws above the lens on the front of the camera.
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Adicionar comentário

Remove the 4.3 mm black screw under the lens ring and the 4.8 mm black screw under the camera.
  • Remove the 4.3 mm black screw under the lens ring and the 4.8 mm black screw under the camera.

Adicionar comentário

Remove the 4.8 mm black screw on the left side of the camera.
  • Remove the 4.8 mm black screw on the left side of the camera.

Adicionar comentário

Remove the front panel by lifting it away from the camera's body.
  • Remove the front panel by lifting it away from the camera's body.

Adicionar comentário

Slide the outer eyepiece upward to remove it.
  • Slide the outer eyepiece upward to remove it.

Adicionar comentário

Remove the two 4.75 mm black screws located  on the top of the camera.
  • Remove the two 4.75 mm black screws located on the top of the camera.

Adicionar comentário

Remove the four 4.3 mm  black screws near the bottom corners of the eyepiece at the back of the camera.
  • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Adicionar comentário

Slowly separate the top panel from the camera by pushing it upward. Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.
  • Slowly separate the top panel from the camera by pushing it upward.

  • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Adicionar comentário

Remove two 6.5 mm black screws from the panel.
  • Remove two 6.5 mm black screws from the panel.

Adicionar comentário

Remove plastic Remote Control Socket cap by pulling it straight out.
  • Remove plastic Remote Control Socket cap by pulling it straight out.

Adicionar comentário

Slide panel toward bottom of camera to remove. Slide panel toward bottom of camera to remove.
  • Slide panel toward bottom of camera to remove.

Adicionar comentário

Remove two 5.5 mm screws from front of camera.
  • Remove two 5.5 mm screws from front of camera.

Adicionar comentário

Remove grip panel.
  • Remove grip panel.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jackie

Member since: 17-04-2011

218 reputação

3 Guides authored

Equipe

Cal Poly, Team 8-8, Regan Spring 2011 Membro de Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 9

Últimos 30 dias: 21

Todo: 2,772