Ir para o conteúdo principal

Introdução

This fix is safe and only requires a screwdriver.

Peças

Nenhum componente especificado.

  1. Canon EOS 30 Battery Door Replacement, Front Panel: passo 1, imagem 1 %32
    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. Canon EOS 30 Battery Door Replacement: passo 2, imagem 1 %32
    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. Canon EOS 30 Battery Door Replacement: passo 3, imagem 1 %32
    • Remove the 4.8 mm black screw on the left side of the camera.

  4. Canon EOS 30 Battery Door Replacement: passo 4, imagem 1 %32
    • Remove the front panel by lifting it away from the camera's body.

  5. Canon EOS 30 Battery Door Replacement, Bottom Panel: passo 5, imagem 1 %32
    • Remove seven 4.25 mm black screws on the bottom panel.

  6. Canon EOS 30 Battery Door Replacement: passo 6, imagem 1 %32
    • Remove the bottom panel.

  7. Canon EOS 30 Battery Door Replacement, Side Panel With Remote Control Socket: passo 7, imagem 1 %32
    • Remove two 6.5 mm black screws from the panel.

  8. Canon EOS 30 Battery Door Replacement: passo 8, imagem 1 %32
    • Remove the plastic remote control socket cap by pulling it straight out.

  9. Canon EOS 30 Battery Door Replacement: passo 9, imagem 1 %32 Canon EOS 30 Battery Door Replacement: passo 9, imagem 2 %32
    • Slide panel toward bottom of camera to remove.

  10. Canon EOS 30 Battery Door Replacement, Top Panel: passo 10, imagem 1 %32
    • Slide the outer eyepiece upward to remove it.

  11. Canon EOS 30 Battery Door Replacement: passo 11, imagem 1 %32
    • Remove the two 4.75 mm black screws located on the top of the camera.

  12. Canon EOS 30 Battery Door Replacement: passo 12, imagem 1 %32
    • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

  13. Canon EOS 30 Battery Door Replacement: passo 13, imagem 1 %32 Canon EOS 30 Battery Door Replacement: passo 13, imagem 2 %32
    • Slowly separate the top panel from the camera by pushing it upward.

    • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

  14. Canon EOS 30 Battery Door Replacement, Grip: passo 14, imagem 1 %32
    • Remove the two 5.5 mm screws from front of camera.

  15. Canon EOS 30 Battery Door Replacement: passo 15, imagem 1 %32
    • Remove grip panel.

  16. Canon EOS 30 Battery Door Replacement, Battery Door: passo 16, imagem 1 %32
    • Remove one black screw from battery door on underside of grip.

  17. Canon EOS 30 Battery Door Replacement: passo 17, imagem 1 %32
    • Remove battery door.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jackie

Membro desde: 17/04/2011

236 Reputação

3 Guias de autoria

Equipe

Cal Poly, Team 8-8, Regan Spring 2011 Membro de Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Membros

22 Guias de autoria

Um comentário

I was able to complete this by going from step 9 to 15. Oddly, I only had one screw to remove in step 15 but the grip piece easily slid out without needing to remove the top of the camera.

Alan - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 17

Duração total: 3,728