Conserte seus objetos Comunidade Loja
Participe da comunidade de reparos - Criar conta

Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement

Introdução

Use this guide to replace the motherboard of the Cambridge SoundWorks OontZ Angle Plus.

O que você precisa

  1. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement, Lower Casing: passo 1, imagem 1 %32 Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement, Lower Casing: passo 1, imagem 2 %32

    • Pull back the six screw covers on the bottom of the device.

    • Starting from the screw covers, peel the casing away from the bottom plate.

    Editar
    Pergunte ao FixBot

  2. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement, Battery: passo 2, imagem 1 %32

    • Unscrew the five 11.5mm Phillips screws on the bottom plate.

    Editar
    Pergunte ao FixBot

  3. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 3, imagem 1 %32

    • Carefully pull apart the bottom plate and the top plate, using the blue plastic opening tool.

    Editar
    Pergunte ao FixBot

  4. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 4, imagem 1 %32

    • Once the bottom plate and the top plate are separated, slowly pull the back plate away from the top plate.

    • There are wires connected to both plates so do this step with care.

    Editar
    Pergunte ao FixBot

  6. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 5, imagem 1 %32

    • Unscrew the two 10 mm Phillips screws on the brace holding down the battery.

    • Remove the brace that holds the battery in place.

    Editar
    Pergunte ao FixBot

  7. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 6, imagem 1 %32

    • Separate the battery from the bottom plate and set the bottom plate aside.

    Editar
    Pergunte ao FixBot

  8. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 7, imagem 1 %32

    • With some force, push the motherboard straight in toward the center of the device.

    Editar
    Pergunte ao FixBot

  9. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 8, imagem 1 %32

    • Pull the motherboard straight out of the device.

    • There is some adhesive on the motherboard that holds it in place. This make the motherboard fit in the groove rather tight.

    Editar
    Pergunte ao FixBot

  10. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 9, imagem 1 %32

    • Desolder the wires that connect the battery to the motherboard, negative (black wire) and positive (red wire).

    Editar
    Pergunte ao FixBot

  11. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement, Motherboard: passo 10, imagem 1 %32

    • Unplug the wires that connect the speakers to the motherboard.

    Editar
    Pergunte ao FixBot

  12. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 11, imagem 1 %32

    • Unplug the thin white cable connected to the buttons.

    Editar
    Pergunte ao FixBot

  13. Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 12, imagem 1 %32 Cambridge SoundWorks OontZ Angle Plus Motherboard Replacement: passo 12, imagem 2 %32

    • Desolder the wires that connect the LED to the motherboard.

    Editar
    Pergunte ao FixBot
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Farshad Mohebban

Membro desde: 02/10/16

524 Reputação

Autoria de 4 guias

Emblemas: 13

+10 outros emblemas

Equipe

USF Tampa, Team 1-1, Nance Spring 2016 Membro de USF Tampa, Team 1-1, Nance Spring 2016

USFT-NANCE-S16S1G1

4 Membros

Autoria de 6 guias

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 16

Ao todo: 2,060