Introdução

Use this guide to replace the AUX/USB port in your device.

Peças

Não são necessárias peças.

  1. Flip speaker over so that the bottom is facing up.
    • Flip speaker over so that the bottom is facing up.

    • Using the blue spudger, lift the gray foam up and slowly peel it off with your hand.

    Adicionar comentário

  2. Using the screwdriver, unscrew three  screws.
    • Using the screwdriver, unscrew three screws.

    • Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions.

    Adicionar comentário

    • Remove the screw that is above the charging port.

    Adicionar comentário

    • Remove the two screws connecting the motherboard to the bottom cover of the speaker.

    • Remove the bottom cover.

    Adicionar comentário

    • Using the blue plastic opening tool, pry up the small black clamp connecting the AUX/USB port to the lower circuit board.

    • Remove the AUX/USB port from the device.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Brian Butner

Member since: 27-09-2017

431 reputação

3 Guides authored

Equipe

USF Tampa, Team S6-G2, Remmell Fall 2017 Membro de USF Tampa, Team S6-G2, Remmell Fall 2017

USFT-REMMELL-F17S6G2

4 Membros

3 Guides authored

Any idea where I can find the USB/Aux board for sale?

Chad - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 67

Últimos 30 dias: 241

Todo: 2,767