Conserte seus objetos Comunidade Loja

Beats Solo 3 Charging Port Replacement

Introdução

This is a charging port replacement guide for the Beats Solo 3 Headphones, Model number A1796. Symptoms that suggest the need for a charging port replacement can be found on our troubleshooting page.

O que você precisa

  1. Beats Solo 3 Charging Port Replacement, Charging Port: passo 1, imagem 1 %32

    • Use a nylon or metal spudger to carefully remove the ear pad from the right ear cup.

    • Be careful to not rip the ear pad fabric with your tools.

    Editar

  2. Beats Solo 3 Charging Port Replacement: passo 2, imagem 1 %32

    • Use a Phillips #00 screwdriver to remove the seven screws that hold the speaker in place.

    • There are two screws in the big red circle at the bottom.

    Editar

  4. Beats Solo 3 Charging Port Replacement: passo 3, imagem 1 %32

    • Desolder all wires connecting the circuit panel to the rest of the device.

    • There are two wires in the big red circle at the bottom and one in the small red circle above.

    Editar

  5. Beats Solo 3 Charging Port Replacement: passo 4, imagem 1 %32 Beats Solo 3 Charging Port Replacement: passo 4, imagem 2 %32

    • After you desolder all wires you are able to remove and replace the charging port.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 34

Últimos 30 dias: 185

Duração total: 4,769