Conserte seus objetos Comunidade Loja

Basis B1 Band LED Screen Replacement

Introdução

This guide shows how to replace the LED screen. This is a more complicated guide because it involves removing the back plate of the watch along with the battery.

O que você precisa

  1. Basis B1 Band LED Screen Replacement, Watch Strap: passo 1, imagem 1 %32

    • Wedge a plastic opening tool between band contacts.

    Editar

  2. Basis B1 Band LED Screen Replacement: passo 2, imagem 1 %32

    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

    Editar

  3. Basis B1 Band LED Screen Replacement, Back Plate: passo 3, imagem 1 %32

    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

    Editar

  4. Basis B1 Band LED Screen Replacement, Battery: passo 4, imagem 1 %32

    • Use tweezers to remove elastomeric, or zebra, connector.

    Editar

  6. Basis B1 Band LED Screen Replacement: passo 5, imagem 1 %32 Basis B1 Band LED Screen Replacement: passo 5, imagem 2 %32

    • Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

    Editar

  7. Basis B1 Band LED Screen Replacement: passo 6, imagem 1 %32

    • Use the pointy edge of the spudger tool to detach battery leads from the circuit board.

    Editar

  8. Basis B1 Band LED Screen Replacement, LED Screen: passo 7, imagem 1 %32 Basis B1 Band LED Screen Replacement, LED Screen: passo 7, imagem 2 %32

    • Use PH000 screw driver to remove two 6mm bracketed screws.

    • Remove bracket.

    Editar

  9. Basis B1 Band LED Screen Replacement: passo 8, imagem 1 %32

    • Use PH000 tool to remove two 4mm screws.

    Editar

  10. Basis B1 Band LED Screen Replacement: passo 9, imagem 1 %32
    Editar

  11. Basis B1 Band LED Screen Replacement: passo 10, imagem 1 %32

    • Use spudger tool to lift the clasp of LED connector strip and remove from watch case.

    Editar

  12. Basis B1 Band LED Screen Replacement: passo 11, imagem 1 %32

    • Use spudger tool to remove the LED screen from the watch case.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Kaitlyn Lee

Membro desde: 11/06/17

518 Reputação

Autoria de 4 guias

Emblemas: 7

+4 outros emblemas

Equipe

IUPUI, Team S6-G1, Baechle Fall 2017 Membro de IUPUI, Team S6-G1, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G1

Membros da 4

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 3

Duração total: 203