Ir para o conteúdo principal

Azpen A701 Charger Port Replacement

O que você precisa

  1. Azpen A701 Charger Port  Replacement, General Disassembly Prerequisite Guide: passo 1, imagem 1 %32
    • Remove the two 2cm screws on the bottom using the PH0 Phillips head screw driver.

  2. Azpen A701 Charger Port  Replacement: passo 2, imagem 1 %32 Azpen A701 Charger Port  Replacement: passo 2, imagem 2 %32
    • Pry open back piece with plastic spudger.

    • Remove the back piece of the device.

    • The back panel may be difficult to pry off, use gentle force.

  3. Azpen A701 Charger Port  Replacement: passo 3, imagem 1 %32
    • Disconnect speaker (which is attached by black and red wires) from back piece using plastic spudger.

  4. Azpen A701 Charger Port  Replacement: passo 4, imagem 1 %32
    • Gently pry the battery off of the device with the plastic spudger.

    • There is a large amount of glue holding the battery to the device.

    • Do not puncture the battery with the plastic spudger.

  5. Azpen A701 Charger Port  Replacement, Charger Port: passo 5, imagem 1 %32
    • The charger port is located on the underside of the motherboard (as pictured).

  6. Azpen A701 Charger Port  Replacement: passo 6, imagem 1 %32
    • Remove the charger port by using tweezers and gently pulling.

  7. Azpen A701 Charger Port  Replacement: passo 7, imagem 1 %32
    • Solder and place new charger port.

Conclusão

To reassemble your device, snap back piece on to the front piece and screw in both 2cm screws at the bottom.

Michael

Membro desde: 03/11/15

568 Reputação

Autoria de 4 guias

Equipe

Colorado Springs, Team 2-1, Panko Spring 2015 Membro de Colorado Springs, Team 2-1, Panko Spring 2015

UCCS-PANKO-S15S2G1

Membros da 3

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 561