Conserte seus objetos Comunidade Loja

August Smart Lock Accelerometer Replacement

Introdução

The accelerometer is important to making sure the August Smart Lock can rotate with the motor. This guide will teach how to take out the accelerometer from within the device.

O que você precisa

  1. August Smart Lock Accelerometer Replacement, Accelerometer: passo 1, imagem 1 %32 August Smart Lock Accelerometer Replacement, Accelerometer: passo 1, imagem 2 %32 August Smart Lock Accelerometer Replacement, Accelerometer: passo 1, imagem 3 %32

    • Flip device over so the black bottom is facing you.

    • Undo latches on both sides to remove the metal cover.

    • Using a Phillips #0 screwdriver, remove the black screws to release the back cover.

    • To unscrew all of the screws, you will need to close the latches again.

    • When you lift off the cover, be careful not to lift to far up. The cover contains the speaker which is connected to the motherboard.

    Editar

  2. August Smart Lock Accelerometer Replacement: passo 2, imagem 1 %32 August Smart Lock Accelerometer Replacement: passo 2, imagem 2 %32 August Smart Lock Accelerometer Replacement: passo 2, imagem 3 %32

    • Grab the gears and lift them up to remove from the device

    Editar

  4. August Smart Lock Accelerometer Replacement: passo 3, imagem 1 %32 August Smart Lock Accelerometer Replacement: passo 3, imagem 2 %32 August Smart Lock Accelerometer Replacement: passo 3, imagem 3 %32

    • Remove the (3) three silver screws by the motor using a Phillips #0 screwdriver.

    • Disconnect the speaker plug from the motherboard

    • Disconnect the battery plugs from the motherboard.

    Editar

  5. August Smart Lock Accelerometer Replacement: passo 4, imagem 1 %32

    • Once the speaker is disconnected, remove the back cover.

    • Lift up the motherboard and motor assembly out of the device.

    Editar

  6. August Smart Lock Accelerometer Replacement: passo 5, imagem 1 %32 August Smart Lock Accelerometer Replacement: passo 5, imagem 2 %32

    • Locate the Accelerometer. It is attached to the motherboard by a ribbon.

    • Lift up the black tab to remove the ribbon from the motherboard.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas executaram este guia.

Autor(a)

com 2 outros contribuidores

William Fink

Membro desde: 09/26/17

766 Reputação

Autoria de 3 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team S11-G6, Passmore Fall 2017 Membro de USF Tampa, Team S11-G6, Passmore Fall 2017

USFT-PASSMORE-F17S11G6

Membros da 4

Autoria de 3 guias

7 comentários

Any idea where can I get a new accelerometer to complete this repair?

Thai Nguyen - Responder

Where can we get a new accelerometer. My phone was not connecting because of the ribbon was broken inside

Dinesh Sharma - Responder

Same as above…. where to locate an accelerometer??

osallabe - Responder

Did anyone find out where to buy the part?

LBurd - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 10

Últimos 30 dias: 40

Duração total: 7,601