Conserte seus objetos Comunidade Loja

Atari Lynx Backlight Replacement

Introdução

Before starting this guide you may need some experience with soldering/ desoldering. If you do not know how, you can learn by clicking the link we put on step 8 (when you have to desolder the backlight).

O que você precisa

  1. Atari Lynx Backlight Replacement, Atari Lynx: passo 1, imagem 1 %32

    • Before disassembling your Atari Lynx, be sure the device is powered off.

    • Remove any game in the console by opening the right latch and sliding the game to the right.

    Editar

  2. Atari Lynx Backlight Replacement: passo 2, imagem 1 %32

    • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

    • Pinch the rear panel with your fingers and lift away from the Atari.

    Editar

  3. Atari Lynx Backlight Replacement: passo 3, imagem 1 %32

    • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear any wires attached to battery panel.

    Editar

  5. Atari Lynx Backlight Replacement: passo 4, imagem 1 %32

    • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear the speaker wire while removing the control panel.

    Editar

  6. Atari Lynx Backlight Replacement, Backlight: passo 5, imagem 1 %32

    • Pull out the logic-board.

    • Pull to the sides the four rubber tabs holding in the screen

    Editar

  7. Atari Lynx Backlight Replacement: passo 6, imagem 1 %32

    • Unscrew the two 10 mm screws as shown with a Phillips #0 screwdriver in order to remove the shield behind the backlight.

    Editar

  8. Atari Lynx Backlight Replacement: passo 7, imagem 1 %32

    • Flip over the motherboard and remove the shield behind the backlight.

    Editar

  9. Atari Lynx Backlight Replacement: passo 8, imagem 1 %32 Atari Lynx Backlight Replacement: passo 8, imagem 2 %32

    • Flip the motherboard back over and desolder the two components that are holding the backlight in place.

    • If you need help with basic desoldering, click here.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

John Lopez

Membro desde: 01/27/14

446 Reputação

Autoria de 4 guias

Emblemas: 9

+6 outros emblemas

Equipe

Cal Poly, Team 1-42, Maness Winter 2014 Membro de Cal Poly, Team 1-42, Maness Winter 2014

CPSU-MANESS-W14S1G42

Membros da 5

Autoria de 16 guias

Um comentário

Good instructions but my Atari is different

909 - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 12

Últimos 30 dias: 30

Duração total: 4,717