Asus MeMO Pad 7 ME170C Motherboard Replacement

Introdução

The motherboard is where all of the action takes place. It connects you to the internet and video streaming as well as running electricity to other parts of the device including the speakers and battery.

O que você precisa

Passo 1 Motherboard

Asus MeMO Pad 7 ME170C Motherboard Replacement, Motherboard: passo 1, imagem 1 %32

Asus MeMO Pad 7 ME170C Motherboard Replacement, Motherboard: passo 1, imagem 2 %32

Asus MeMO Pad 7 ME170C Motherboard Replacement, Motherboard: passo 1, imagem 3 %32

Power off the device before disassembly.
Be gentle; excessive force can result in a damaged or cracked screen.
Gently pry a Jimmy all around the seam of the device until the back panel detaches.

Editar

Passo 2

Asus MeMO Pad 7 ME170C Motherboard Replacement: passo 2, imagem 3 %32

Use an iFixit opening tool to gently push the black bundle cable connector in a forward motion until it loosens without pushing down on the bundle cable connector.

Editar

Passo 3

Asus MeMO Pad 7 ME170C Motherboard Replacement: passo 3, imagem 3 %32

Use the plastic opening tool to pry around the edges of the battery.
The battery should be laying freely in its port.
Lift the battery out of its port.

Editar

Passo 4

Asus MeMO Pad 7 ME170C Motherboard Replacement: passo 4, imagem 3 %32

Use a plastic opening tool to slide the white cable connector completely out of the port.

Editar

Passo 5

Asus MeMO Pad 7 ME170C Motherboard Replacement: passo 5, imagem 3 %32

Ferramenta utilizada neste passo:

Tweezers

$4.99

Comprar

Flip up the beige clip to loosen the cable.
Use the wide nosed tweezers to pinch the blue tab attached to the ribbon cable.
Pull the blue tab gently in a lateral motion until it is completely out of its port.

Editar

Passo 6

Asus MeMO Pad 7 ME170C Motherboard Replacement: passo 6, imagem 3 %32

Use the wide nosed tweezers to gently pull out the orange ribbon inserted in the port on the motherboard.

Editar

Passo 7

Asus MeMO Pad 7 ME170C Motherboard Replacement: passo 7, imagem 3 %32

Use a plastic opening tool to push the white cable connector out of its port in a side to side motion.

Editar

Passo 8

Use the Phillips #000 screwdriver to unscrew the seven screws.
There should be two silver and five black screws.

Editar

Passo 9

Once the screws are removed, the speaker component will be loosely laying in the track.
Use the metal spudger tool to remove the speaker by gently lifting the edge of it.

Editar