O que você precisa
-
-
Remove the magnetic ear pads by gently pulling up away from the head set.
-
-
-
-
Use a soldering iron to desolder the black and yellow wires from the two metal plates near the bottom of the device.
-
Use a soldering iron to desolder the 13 wires in rows along the left and bottom sides of the headset motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
3 outras pessoas executaram este guia.
2 comentários
Any chance I could get the E250336. USB board part from you guys? I need one.
I am having a very tough time finding this Part online. Thanks!