Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

The first-generation 12" Retina MacBook has a design quirk that requires connection to low-voltage power after a repair. If this step is skipped, permanent logic board damage may result. This procedure is not required for 2016 and later models.

Connecting the Retina MacBook to low-voltage power requires a 5-Watt A/C adapter (like the kind that comes with iPhones) and a USB-A to USB-C cable, neither of which is included in the MacBook's original box.

Ferramentas

Nenhuma ferramenta especificada.

  1. Using a USB-A to USB-C cable, connect your MacBook to a standard 5 W iPhone wall charger.
    • Using a USB-A to USB-C cable, connect your MacBook to a standard 5 W iPhone wall charger.

  2. Kit de pontas universal para chave

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de pontas universal para chave

    Upgrade Your Toolbox
  3. Plug the charger into a surge-protected A/C outlet.
    • Plug the charger into a surge-protected A/C outlet.

    • Wait until you hear the power connect chime (you should also see the battery charge symbol onscreen).

    • You'll typically hear the chime in 10 seconds or less—unless your battery charge level is very low, in which case it may take up to 15 minutes.

    • Power on your MacBook by pressing the power button.

    • Once the MacBook successfully powers on, you can disconnect the 5 W charger, and use/charge your MacBook normally.

    • If the MacBook fails to power on after 15 minutes, there may be an issue with your repair.

Conclusão

To reassemble your device, follow these instructions in reverse order.

13 outras pessoas concluíram este guia.

Jeff Suovanen

Membro desde: 06-08-2013

289.548 Reputação

256 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

116 Membros

11.201 Guias de autoria

I recently did an upper disassembly on my MacBook 2015 and was doing the steps for a low voltage power up but when I plugged the power in the MacBook made the startup noise for a second then restart and did it again in these short cycles. I’m wondering if I improperly did the start-up process or perhaps something else is going on?

John Wiedemer - Responder

Hi John, I have the same problem, have you found a solution ?

maxime.duret -

What sort of logic board damage might happen if this step is not followed? One of our customers brought us his 2015 MacBook after attempting to replace the battery himself. The new battery is not recognized, and the computer shuts off after about a minute even when plugged in. Could this be the result of him not applying the low voltage power?

clover - Responder

Did a batter replacement and woops… used a 10W supply for 15 minutes.

Then noticed my mistake and changed to 5W supply, but computer does not start at all.

Could this be the “logic board damage” mentioned?

Niels Koldsø - Responder

I just replaced a new battery on my MacBook ProRetina Pro early 2015 and bought this cable and adapter after following all the steps and instructions but when I plug the cable in, the display screen is still off (black) no chime sound of battery charging symbol on the screen. I plugged everything back in correctly and followed the steps exactly how they said and my mac won’t display anything. What could be wrong?

Ervin Valdez - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 16

Últimos 7 dias: 102

Últimos 30 dias: 440

Duração total: 7,022