Introdução

This mouse was designed with usability in mind taking little to no effort to fix anything.

  1. Use the screwdriver to remove the stickers hiding the screws marked in red.
    • Use the screwdriver to remove the stickers hiding the screws marked in red.

    Adicionar comentário

  2. Remove the 4 screws to continue.
    • Remove the 4 screws to continue.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pry the center of the mouse apart to separate the upper and lower housing of the boards.

    Adicionar comentário

    • Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.

    • Don't pull the wires too hard, as they might break.

    Adicionar comentário

    • Pull the Scroll wheel, in red, to the left to remove it.

    • This may take some force to remove. Make sure to pull it parallel to the board, instead of perpendicularly.

    • Replace/clean if needed.

    • If your mouse still doesn't work after this step, please continue onto the next step.

    Adicionar comentário

    • Desolder these 3 pins and solder the replacement part in.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Vincent Lee

Member since: 23-01-2014

361 reputação

3 Guides authored

Equipe

Cal Poly, Team 1-39, Maness Winter 2014 Membro de Cal Poly, Team 1-39, Maness Winter 2014

CPSU-MANESS-W14S1G39

4 Membros

8 Guides authored

Hi Vincent, could you please help me with finding a place where this rotation sensor can be bought. I'm not even sure how this part is called so searching for it is quite tricky.

Cheers,

Michal

Michal Rorat - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 10

Últimos 7 dias: 21

Últimos 30 dias: 68

Todo: 4,246