Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
While holding the device firmly, wedge the iFixit Opening Tool into the crease along the outer edge of the device (as shown in the image).
-
Slowly, grind the iFixit Opening Tool into the crease along the outer edges of the device until the entire back cover loosens.
-
Then, remove the back cover from the device.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Pry the speaker from the case using the iFixit Opening Tool.
-
Lift the speaker up from the device to remove the speaker wires from their groove in the case.
-
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.