Ir para o conteúdo principal

Alienware 17 R2 Status-Light Board Replacement

O que você precisa

    • Remove the screws that secure the status-light board to the palm-rest assembly.

  1. Alienware 17 R2 Status-Light Board Replacement, Lifting the Status-Light Board: passo 3, imagem 1 %32
    • Lift the status-light board off the palm-rest assembly.

  2. Alienware 17 R2 Status-Light Board Replacement, Screw Align: passo 4, imagem 1 %32
    • Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.

  3. Alienware 17 R2 Status-Light Board Replacement, Screw Replacement: passo 5, imagem 1 %32
    • Replace the screws that secure the status-light board to the palm-rest assembly.

  4. Alienware 17 R2 Status-Light Board Replacement, Sliding the Status-Light Board: passo 6, imagem 1 %32
    • Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Terrence15

Membro desde: 12/18/17

79.034 Reputação

Autoria de 441 guias

Equipe

RampUP America, Inc. Membro de RampUP America, Inc.

Community

Membros da 42

Autoria de 1.985 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 282