Afterglow Wireless PS3 Controller Trigger Button Replacement
Introdução
Ir para o passo 1Replacing the trigger button requires the removal of the controller back plate and the careful pulling of the trigger from its housing.
O que você precisa
Ferramentas
-
-
Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.
-
Lift up and remove the controller back plate.
-
-
-
With one hand, hold the controller down and with the other pull up on the lower clear plastic trigger housing to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
3 outras pessoas executaram este guia.
Gear Up For Future Repairs
Shop all