O que você precisa
-
-
-
Turn the monitor face-down.
-
Unscrew the 5 screws holding back cover on.
Pergunte ao FixBot
-
-
-
Take the edge tool or a metal ruler and insert it into the bezel.
-
Apply pressure and push down.
-
Do the same to the right side.
-
Once the side of the bezel facing you is decoupled, take the back cover and pry it loose.
-
-
-
Remove the Flat Flex Cable from the Power Supply board located under the metal cage.
-
Pull the cord back and out of the way.
-
-
-
-
Turn the monitor around.
-
Unscrew the 1 screw holding the Flat power Cable cover on.
-
Lift up and remove the Flat Power Cable cover.
-
-
-
Turn the monitor around.
-
Lift the back of the metal cage slightly.
-
Pull the cage toward self.
-
-
-
Lift the Flat Flex Cable holder tabs to release the cables.
-
Lift up on the Flat Flex Cables and bend them out of the working area.
-
-
-
Unplug the 4 backlight wires from their ports on the Power Supply Board.
-
-
-
Unscrew the 5 screws holding the Power Supply and Video Display boards.
-
-
-
Carefully detach the two boards at their connector joint.
-
Replace outlined part.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
2 outras pessoas executaram este guia.
Equipe
USF Tampa, Team 1-3, Brown Fall 2014 Membro de USF Tampa, Team 1-3, Brown Fall 2014
USFT-BROWN-F14S1G3
3 Membros
Autoria de 5 guias
