Conserte seus objetos Comunidade Loja

2011-2013 Scion tC Mid-Range Door Speaker Replacement

O que você precisa

  1. 2011-2013 Scion tC Mid-Range Door Speaker Replacement, Mid-Range Door Speaker: passo 1, imagem 1 %32

    • Using plastic pry tool. Pry silver cover from handle.

    Editar

  2. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 2, imagem 1 %32

    • Using plastic pry tool. Pry Control panel off which controls locking, unlocking and windows.

    Editar

  3. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 3, imagem 1 %32

    • Un-attach white header(connector) from control panel. Push side tab on side of white connector if a little stuck.

    Editar

  4. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 4, imagem 1 %32

    • Using pry tool. Pry off plastic plate in section of door lock or pull handle.

    Editar

  6. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 5, imagem 1 %32

    • Remove the #4 25mm screw and the #2 25mm screw on panel with a standard Phillips Screwdriver.

    Editar

  7. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 6, imagem 1 %32

    • Pry Off Full Door Panel starting at bottom and working up the side, pulling fairly hard waiting. Clicking noises are a good sign the door panel is unlocking.

    Editar

  8. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 7, imagem 1 %32

    • Once door panel is free, remember to remove header from the tweeter in upper right hand corner of panel.

    Editar

  9. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 8, imagem 1 %32

    • Remove bracket from door by unscrewing the two 14 mm nuts pictured here connected to the speaker unit.

    Editar

  10. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 9, imagem 1 %32

    • Remove speaker from bracket by unscrewing the two #2 12mm screws using a Phillips head screwdriver.

    Editar

  11. 2011-2013 Scion tC Mid-Range Door Speaker Replacement: passo 10, imagem 1 %32

    • Desolder wires to new speaker unit using solder wick or a desoldering tool.

    • If you don't have experience soldering, make sure to check out this soldering guide.

    • Soldering uses high temperatures. Be careful not to damage the components or injure yourself in the process.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

sdwelsh

Membro desde: 05/04/15

187 Reputação

Autoria de 1 guia

Emblemas: 8

+5 outros emblemas

Equipe

Cal Poly, Team 8-2, Regan Spring 2015 Membro de Cal Poly, Team 8-2, Regan Spring 2015

CPSU-REGAN-S15S8G2

Membros da 5

Autoria de 7 guias

Um comentário

Are they 6.5 subwoofer lower door or 6×9

pauliemcfly25 - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 9

Últimos 30 dias: 38

Duração total: 3,866