M5 Quick Reference Guide
Quick Reference Guide
Getting Started
New Patient
-
Press [Patient], fill in basic patient information.
-
Press [Exam].
-
Move [Trackball] to choose probe and exam mode.
Scanning
B Mode
-
Press [B] to enter B mode.
-
Rotate [Gain & iTouch] knob to adjust gain.
CDFI/Power Mode
-
Press [Color] to enter Color mode.
-
Move [Trackball] to change the position of ROI.
-
Press [Set], and then move [Trackball] to change the size of ROI, press [Set].
PW/CW Mode
-
Move [Trackball] to change the position of sample volume.
-
Use related [Function Key] to change the size and angle of sample volume, press [Update] or [PW] to get the Pulse Wave Doppler.
Image Adjustment
Freq 7.5MHz Beam Off Focus Position Dynamic Range 83 FOV W Tail Off Gray Map Map7 Focus Number 1 9 Stem Traperald Off
The [Soft Key] is corresponding to the soft menu. Use left/right keys to switch the modes, use up/down keys to choose parameters and turn pages up or down.
The parameters in B mode: Frequency, iBeam, Focus Position, iClear, ExFOV, Line Density, Gray Map, Focus Number, Colorize, FOV, iTouch, Persistence, L/R Flip, Colorize Map, Dynamic Range, Acoustic Power, IP, U/D Flip, Magnify, FOV position.
The parameters in Color mode: Scale, Flow State, WF, Invert, Packet Size, Frequency, Priority, Baseline, Line Density,
Cadastre-se gratuitamente no iFixit para ler o documento completo (2 páginas)
Precisamos de uma conta gratuita para ajudar a bloquear bots e manter o iFixit voltado para pessoas.
