Operation and Care Manual
Asepsis 21 Cabinet Mounted Instrument Head
CONTENTS
| Label Definitions .................................................. | 1 |
|---|---|
| Introduction ......................................................... | 2 |
| Controls ................................................................ | 3 |
| Operation ............................................................ | 5 |
| Cleaning and Maintenance.............................. | 6 |
| Warranty............................................................... | 7 |
| Technical Information......................................... | 7 |
Table Caption: This table lists the main sections of a document along with their corresponding page numbers.
Label Definitions
Hazards which result in severe personal injury or death.
Hazards which could result in personal injury.
Hazards which could result in equipment or property damage.
Alert user to pertinent facts and conditions.
C O N FO R M S TO
U L
STD .2601-1
C ERTIFIED TO
C A N /C SA
-C 22. 2
N O .601. 1
'DANGER - EXPLOSION HAZARD DO NOT USE THIS EQUIPMENT IN THE PRESENCE OF FLAMMABLE ANESTHETICS'
Introduction
Your Asepsis 21 Cabinet Mounted Instrument Head by Knight Manufacturing has been designed and manufactured with care and you in mind. It is constructed of the highest quality material to provide years of trouble free service.
The instrument head provides for the control of up to five air operated handpieces and a 3-way syringe. The handpieces are stored in their respective holders which may be rotated to your preferred position. When the handpiece is removed from the holder, it is automatically selected to operate when the foot control is depressed.
Should a handpiece be removed from its holder while another handpiece is being used (as for bur change by the assistant), that handpiece can be turned off by inserting a simulator or syringe into the holder. Contact your authorized Knight dealer for details.
Your new Asepsis 21 also features a handpiece lubricant collection system. The handpiece exhaust tubes from the four port handpiece tubes are connected to a collector jar which is located on the bottom center of the instrument head. The collection jar can be removed to be emptied and cleaned simply by unscrewing it from the unit. The collector jar should be inspected daily and emptied when approximately 1/2 inch of oil has accumulated.
The aerodynamic shape of the instrument head lends itself to easy cleaning or wrapping for infection control.
Controls
ASEPSIS 21 HANDPIECE DELIVERY SYSTEM CONTROLS LOCATED UNDER COVER
A complete set of handpiece and syringe adjustments are located directly under the magnetically held cover for protection against contamination. Lift up either back corner of the cover for easy removal. All controls are labeled with symbols identifying their function. A description of their locations an functions are identified below.
I-2-3 ~ HANDPIECE COOLANT WATER VOLUME
8 ~ SYRINGE WATER VOLUME ADJUSTMENT
Controls the volume of water to the syringe and
