General Equipment Hole Digger 330H (2014) (RPO610)

The General Equipment Hole Digger 330H 2014 is a heavy-duty piece of equipment designed for digging holes in the ground. It is commonly used in construction, landscaping, and agricultural applications to dig holes for fence posts, trees, poles, and other similar purposes. This equipment is powered by a 5.5-horsepower Honda engine and has a maximum digging depth of 30 inches and a maximum diameter of 8 inches. According to the manufacturer, the 330H model is built with high-quality components for durability and efficiency.

It is designed to be easy to use, with features like an ergonomic handlebar and fingertip throttle control. Its two-wheel design also provides stability and balance during operation. This equipment is versatile and can be used on a variety of terrains, including soft and compact soils.

To identify, this machine has a sturdy frame and large digging components. It has two large wheels that provide balance and stability during operation. The engine is located at the front of the machine, and the digging component is attached to the rear. The machine has an ergonomic handlebar for easy control, and the throttle control is located at the user's fingertips.

The dimensions of the device are approximately 31 inches wide, 46 inches high, and 83 inches long. It weighs around 240 pounds, making it a heavy-duty machine suitable for demanding tasks.

Users can tell the General Equipment Hole Digger 330H 2014 apart from other similar models by looking for the distinctive design features, such as the two large wheels, the Honda engine, and the ergonomic handlebar.

The model number of the device is located on the frame of the machine, usually on a plate or sticker. Users can refer to the manual or manufacturer's website to locate the model number on the device.

Here are the technical specifications for the General Equipment Hole Digger 330H (2014):

• Engine: 5.5-horsepower Honda engine
• Drive System: All-metal, oil-cooled, automatic centrifugal clutch
• Maximum Digging Depth: 30 inches
• Maximum Digging Diameter: 8 inches
• Drive Connection: 1-3/8 inch hexagon drive shaft
• Auger Connections Available: General® 1-3/8 inch hexagon, Ground Hog® 7/8 inch square, or standard Stihl® connection
• Weight: Approximately 240 pounds
• Dimensions: 31 inches wide x 46 inches high x 83 inches long

• Engine: Honda GXV160
  The Honda General Purpose Engine GXV160UH2 is a small engine that is commonly used for powering General Equipment Hole Digger 330H 2014.
• Safety Guidelines: The Dangers of Digging and How to Avoid Them
  The article highlights the importance of following safety guidelines and regulations to prevent accidents and injuries. It discusses common hazards associated with digging, such as cave-ins, falls, and struck-by incidents, and provides recommendations on how to mitigate these risks.
• General Equipment Company Hole Digging Products: Youtube Video
• History of General Equipment
• Operator Manual
• General Equipment Official Website