My click wheel and power button is unresponsive

Question

iPod Nano 4th Generation

Model A1285 / 8 or 16 GB capacity

206 Perguntas Visualizar todos

richie @richie98845

Rep: 13

1

Postado: 19 de jun de 2012

Opções

My click wheel and power button is unresponsive

I've had my 4th Generation Ipod for about 4 years now, and everything is fine i never dropped nor damaged it whatsoever. I used it one day and the click wheel became unresponsive and it shut down on me. I was able to turn it back on but the click wheel became unusable for me to shut it off or even shuffle around. Should i just take it to repair or is there any way i can save my money and fix it myself?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 1

Adicionar um comentário

3 respostas

Solução escolhida

mayer @mayer

Rep: 685,3 mil

MacHale Enterprises

3,4 mil

1,1 mil

2,6 mil

Postado: 19 de jun de 2012

Opções

Here's the best answer I've seen on this issue: it seems that there is some design flaw on the the new curved casing on the 4th gen. i've been reading thru different posts and this seems to be a recurring problem and needs to be addressed by apple. the board/clickwheel after a lot of use loosens up and creating some form of unstable contact, a solution i found is by adding a firm backing to it. i did this by inserting a piece of thin plastic (thin old credit card would do) between the board and the aluminum casing on the bottom end of the iPod. tried this with 2 of my iPods and it worked. of course you need to take the bottom plastic cover and the aluminum connector support with the 2 screws first.

Why has my iPod click wheel stopped working?

Esta resposta foi útil?

Sim Não

Pontuação 2

Adicionar um comentário