Broken flex keyboard dont Work

The keyboard lights up, only the connector of the flex cable broke, but it doesn't detect any key. Could it be because of that connector that applies pressure? Is there a repair for this case? The Touch ID doesn't work, but the fan is functional.

@rodrigorica3074 - The keyboard backlight uses a different connection than the keyboards data connections don't get distracted by that. The ZIF latch (lock) needs to be present it compresses the cable into the sockets contacts. So it sounds like you lost the latch then. You'll need to look for it around your work area as it can fly off a good meter! If you can't find it to put back on or you damaged it you'll need to get a replacement logic board connector to then carefully slide off the latch to put onto your logic board connector. You will need to replace the TouchID cable and the fan unit doesn't look that good. While the fan may run there is a tachometer within it that the circuitry on the cable is dependent on. it looks too damaged to be functional. The last cable connection is the USB-C port cable connector is missing! I see the cut cable end not the connector. I suspect in the process of taking the bottom cover off the cable was cut. Look at the parts images above to compare to yours.

Thanky you bro