I have a Model 796.4027. It comes up with an 'IE' error code. I don't see this in any links. The washer gets to the rinse cycle, motor seems to groan a little before rocking drum 1/4 turn. Timer stays put. Eventually times out with 'IE' code. We end up restarting, sometimes with drum full of water. It usually cycles through on second run through.
ANY HELP?
Esta é uma boa pergunta?
Rep: 453 mil
11
368
1,4 mil
Hi @cb3lazybw
You washer is a rebadged LG model made for Kenmore. This is based on that it is made up from only LG parts
Here's a link that shows what to check when you have an IE error code in LG machines that may help.
If everything mentioned in the link is OK, perhaps try selecting a cold or hot only wash to see if it still occurs.
If it only happens on one temperature and not the other it may be a faulty water inlet valve in the washer.
Esta resposta foi útil?
Últimas 24 horas: 1
Últimos 7 dias: 17
Últimos 30 dias: 49
Duração total: 109
