I replaced my screen following a tutorial and it was pretty easy. However, when I put the charger in to reboot it the laptop chimes but the display won’t show, it’s just blank navy blue. Any help is appreciated, thanks
Esta é uma boa pergunta?
Rep: 4,5 mil
8
12
3
Are you able to boot into Recovery Mode or use an external monitor? If you can't get a picture doing either of those things you could try an SMC reset and a PRAM reset. If it's still happening after doing all that and you can't get a picture then my best guess would be that there is an issue with the display you installed or how you installed it. Good luck!
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 2
Últimos 30 dias: 6
Duração total: 26
