Is there another fix for this pen

Through experimentation, my new Kindle Scribe Pen was made usable by putting an aluminum foil shield that is 1 cm x 12 cm, over the side of the pen that has the groove and magnets, with tape. I had to tune it first, by sliding it up and down, moving it closer or further away from the base of the cone tip, for this to work. Otherwise, the pen seems to be "too strong" and writes 1 1/2 cm away from the surface and leaves trail marks. It's now working fine, but no longer has the sleek manufactured look. Online, this looks to be a frequent problem. Any other suggestions?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário