Rep: 43
3
hi
when i insert my cartriges one by one it recognizes them up to 5 cartriges but when the last one is inserted i get the error that all cartiges can not be recognized.
i have replaced flat cables, printhead, cartrige reader
what else shoul i do?
Esta é uma boa pergunta?
Rep: 43
3
there is a fuse on the main board fuse no.2 it is broken replace it and the issue will be solved.
it is caused by incorrect manual head cleaning.
Esta resposta foi útil?
Últimas 24 horas: 1
Últimos 7 dias: 3
Últimos 30 dias: 4
Duração total: 26
[image|3140460]
i got it solved
there is a fuse on the main board fuse no.2 it is broken replace it and the issue will be solved.
it is caused by incorrect manual head cleaning.
por Saman